Water Analysis Baby

With the Water Analysis Baby, you can quickly and easily determine whether your tap water is suitable for preparing baby food. Because some parameters that can occur in drinking water are particularly dangerous for babies and pregnant women.

Good reasons for the Water Analysis Baby:

• You want the water in your home to be used for baby food.
• There are pregnant women and small children in your house.
• You want to make sure that there are no pollutants such as lead in your tap water.
• Sampling is simple and the analysis result is prepared to be easily understood.
• You live in an old building.
• There are immunocompromised patients in your home.

These 6 important parameters are recorded for you with the baby water analysis:

Lead:

The heavy metal lead is particularly dangerous for babies. Long-term damage, such as reduced intelligence, has been proven to be due to lead.

Copper:

Water for infants must not contain high concentrations of copper, as copper can be toxic and lead to liver and kidney damage.

Nitrite:

Nitrite in drinking water can lead to methaemoglobinaemia. Symptoms include blue skin and lips and shortness of breath.

Nitrate:

Nitrate enters drinking water mainly through agriculture. In the body, nitrate is converted into nitrite, which is particularly toxic to babies.

Sulfate:

On the still very sensitive gastrointestinal tract, an increased dose of sulfate in the drinking water can have a laxative effect on babies.

Sodium:

Low-sodium water should always be used to feed a baby. This is due to the fact that infants do not yet have fully developed kidneys and are therefore less able to break down excess sodium.

Contents of the water analysis kit:

• suitable vessels for sampling
• 1 simple step-by-step guide
• 1 sampling protocol
• 1 test box for dispatch to the laboratory

Step by step to your analysis results:

Step 1:

You can easily order the test kit for the analysis here in our shop. Our water test kit will be conveniently sent to your home within a short time.

Step 2:

You take the water sample yourself. Thanks to the detailed instructions, you do not need any previous knowledge. Now all you have to do is send the test kit to the provided address. In the laboratory, your sample is examined for all parameters of the water test.

Step 3:

After completing the analysis in our laboratory, you will receive a detailed report after 2-3 weeks. You can now see at a glance whether there is any contamination.

Do you still have questions about the result? - No problem!

Our service team is at your disposal!